Sometimes the most luxurious of bathrooms isn’t modern or contemporary in design; in fact it’s often the more formal spaces that truly pamper the users. From tiles that create patterns on the floor to delight the eyes to deep tubs made just for soaking, you’ve designed your formal bathroom to meet all of your needs both stylistically and functionally. So when you see yourself stepping out of your deep soaking tub, be sure to also envision yourself wrapped in the warmed towel waiting for you on the wall.
Towel warmers like those in Wesaunard’s Victorian line are meant to wrap you in luxury while complementing your bathroom in style. With curved escutcheons at each rail, the Victorian line is made to fit into today’s formal bathroom with ease. Available in a number of different sizes and configurations, you can warm as many towels as you need to truly capture the feeling of luxury and style that you’re after.
Add the Towel Warmer to cart to view Accessories
- 120 Volts.
- 250 Watts.
- Wall mounted
- Handcrafted in Birmingham, U.K.
- Can be purchased as Hydronic
- Please contact for custom finishes
Height: 47 inches
Projection: 6 inches
Width: 23.5 inches
Wesaunard warrants its products for 5 years against
1. Any defect in plating or painted finish.
2. Heating elements in electric units 120 volt.
3. All brazed connections-against leaks.
WESAUNARD TOWEL WARMERS MANUAL
All finishes on Wesaunard towel warmers are maintained in the same manner. Never use cleaning agents they will likely damage your units finish. To clean the surface of body oil or finger prints etc, simply wipe the surface with a damp cloth or wet soapy cloth if necessary. This process will return the unit to its peak condition. Buff with soft dry duster to restore lustrous finish.
The electric towel warmer will generally take about thirty minutes to reach its operating temperature. The surface of the towel warmer will normally be too hot to hold on to but not hot enough to damage fabric of any kind. The temperature varies depending on whether or not covered by towels.
Please note that on direct heating systems, in certain agressive water conditions or where a water softener is installed, dezincification of the brass may occur.
Dezincification resistant material (special 70/30 arsenical brass) is available for these systems at an extra charge.
In electric usage the output is limited by the wattage of the element which is sized according to the type of rail and may be approximately 75, 100, 150, 250, 300, 400 or 500 watts.
Most elements supplied encapsulate an operating thermostat at 70 degrees Celsius or 5%. An additional thermal fuse cuts the element out in the unlikely event that the temperature rises to 90 degrees Celsius.
In all cases the emission capability of each rail is greater than the maximum output of the element.