When you’ve put a lot of time and effort into creating the ultimate bathroom, you want every detail to be perfect within the room. This means that not only do your details all need to match one another, but the function of the room has to suit your every need as well. Unfortunately, no matter how beautifully designed and well-appointed your shower is, it won’t help keep you warm once you step out into the rest of the room.
That’s why for beautifully finished bathroom’s, there’s the Baronial line of towel warmers from Wesaunard. These heavy-duty towel warmers are meant to draw the eye with their craftsmanship and style, while at the same time providing you with warm, toasty towels at any time of day.
Now you can step from your shower into the warmth of a fluffy, waiting towel, without needing to sacrifice the style or the design of the rest of the bathroom.
Add the Towel Warmer to cart to view Accessories
- 120 Volts.
- 500 Watts.
- Wall mounted
- Handcrafted in Birmingham, U.K.
- Can be purchased as Hydronic
- Please contact for custom finishes
Height: 37.5 inches
Projection: 9 inches
Width: 47.5 inches
Wesaunard warrants its products for 5 years against the following:
1. Any defect in plating or painted finish.
2. Heating elements in electric units 120 volt.
3. All brazed connections-against leaks.
All finishes on Wesaunard towel warmers are maintained in the same manner. Never use cleaning agents they will likely damage your units finish. To clean the surface of body oil or finger prints etc, simply wipe the surface with a damp cloth or wet soapy cloth if necessary. This process will return the unit to its peak condition. Buff with soft dry duster to restore lustrous finish.PERFORMANCE
The electric towel warmer will generally take about thirty minutes to reach its operating temperature. The surface of the towel warmer will normally be too hot to hold on to but not hot enough to damage fabric of any kind. The temperature varies depending on whether or not covered by towels.DEZINCIFICATION
Please note that on direct heating systems, in certain agressive water conditions or where a water softener is installed, dezincification of the brass may occur.
Dezincification resistant material (special 70/30 arsenical brass) is available for these systems at an extra charge.
In electric usage the output is limited by the wattage of the element which is sized according to the type of rail and may be approximately 75, 100, 150, 250, 300, 400 or 500 watts.
Most elements supplied encapsulate an operating thermostat at 70 degrees Celsius or 5%. An additional thermal fuse cuts the element out in the unlikely event that the temperature rises to 90 degrees Celsius.
In all cases the emission capability of each rail is greater than the maximum output of the element.
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.